Analog-way TripliX - TRC8022 Manual do Utilizador descarregar pdf (Página 15)

TRIPLIX™ (TRC8022) Chapter 5 : LCD SCREEN DESCRIPTION (continued)

PAGE 15

5-5. LCD FUNCTIONS DESCRIPTION (continued)

3-6 [video output] + ENTER. (This menu is available with the OPT-iX-SDTVD1 option only).

NOTE:

The following functions act on the optional video outputs only (Composite video, S.VIDEO, YUV and SDI).

3-6-1 [video standard] + ENTER.

Select the output standard for the video outputs with  + ENTER between:

• [NTSC]: NTSC for composite and S.VIDEO outputs. 60Hz frame rate for YUV & SDI outputs.

• [PAL]: PAL for composite and S.VIDEO outputs. 50Hz frame rate for YUV & SDI outputs.

• [NTSCj]: Japan NTSC for composite and S.VIDEO outputs. 60Hz frame rate for YUV & SDI outputs.

3-6-2 [output rate] + ENTER.

Select a function with  + ENTER between:

• [internal]: The video output rate is generated by the device depending of the selected video standard.

• [input # X]: The video output rate is synchronized onto an input of your choice (video source only).

NOTE:

If the device is already set in follow mode (LCD menu # 3-2 = follow...). This input and the input

used for the follow mode should be the same.

3-6-3 [flicker adj.] + ENTER.

Select a level of anti-flicker with  + ENTER.

3-6-4 [U/Over scan] + ENTER.

Select a function with  + ENTER between:

• [underscan]: The entire image is visible on the screen. Computer display mode is underscan.

• [overscan]: The image is displayed about 8 % bigger than in underscan mode, to avoid seeing the

corners and the borders. Standard TV display mode is overscan.

3-6-5 [pos settings] + ENTER.

Adjust the video image position with the following functions:

• [size]: Adjust the Horizontal & Vertical size with H and V knobs.

• [position]: Adjust the Horizontal & Vertical position with H and V knobs.

3-6-6 [input stab.] + ENTER.

This function allows to improve the input stability of the referenced input. Select the type of the referenced

source between DVD & VCR.

3-6-7 [color tracking] + ENTER.

This function allows to improve the image color (act only if input stab. = VCR).

3-7 [output status] + ENTER.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 52 53

Sem comentários

Analog-way TripliX - TRC8022 Manual do Utilizador Página 15