Analog-way Trans-Scaler XT - TSC550 Manual do Utilizador descarregar pdf (Página 22)

Chapter 10 : PROGRAMMER'S GUIDE TRANS-SCALER XT™

PAGE 22

10-4. COMMANDS AND RESPONSES TABLE

The following table resumes commands which are recognized as valid and the responses that will be returned to the control

device (on the RS-232 port).

VALUE EXAMPLESASCII

COMMAND

RESPONSE

TO HOST

COMMAND

DESCRIPTION

MIN MAX COMMAND RESPONSE ACTION

EXPLANATION

Input commands

C CH Input selection. 0 6 1C CH1 Select composite 2

input.

p PSTD Standard input selection. 0 14 0p PSTD0 Set to NTSC standard.

L TTL

TTL/75Ω load selection.

0 1 0L TTL0 Set RGBS sync. under

75Ω.

Output commands

F OFMT Output format selection. 0 5 2F OFMT2 Select 800 x 600p.

f OSYNC Output Sync. selection. 0 1 1f OSYNC1 Select composite sync.

s SCRN Type of Screen selection. 0 1 0s SCRN0 Select 4/3 screen.

Image commands

P PCH Input selection for

adjustment.

0 7 1P PCH1 Select composite 2

input.

H HPOS Horizontal position. 0 255 15H HPOS15 Set H position to 15.

V VPOS Vertical position. 0 255 10V VPOS10 Set V position to 10.

W HSIZ Horizontal size. 0 255 W HSIZ250 Read H size value.

S VSIZ Vertical size. 0 255 150S VSIZ150 Set V size to 150.

D CON Contrast adjustment. 0 255 D CON128 Read contrast value.

O COL Color adjustment. 0 255 55O COL55 Set color value to 55.

B BRIG Brightness adjustment. 0 255 45B BRIG45 Set brightness value to

45.

T HUE Hue adjustment. 0 255 T HUE128 Read HUE value.

Q OVER Under/Overscan mode

selection.

0 1 0Q OVER0 Set to overscan mode.

a IASP Input aspect ratio selection. 0 2 0a IASP0 Set aspect ratio to 4/3.

R SHAR Sharpness adjustment. 0 8 8R SHAR8 Set sharpness value to

100.

M GAM Gamma adjustment. 0 3 M GAM2 Read gamma value.

Controls commands

r PRES Image Preset. 0 1 1r PRES1 Set the image

adjustments to the

factory settings.

y LOCK Front panel locking. 0 1 0y LOCK0 Unlock the front panel.

K BLKD Black delay selection. 0 10 3K BLKD3 Set black delay to 3s.

v VER Product version. 0 65535 v VER----- Read the unit's internal

version (0 to 65535).

Y FRES DEFAULT VALUE. 0 1 1Y FRES1 Reset to default values.

? DEV Device type. none ? DEV14 # value of the TSC550.

Status commands (read only)

I IFA Input video standard status. none I IFA0 Selected input is NTSC

standard (3.58/60).

NOTE : The commands values are describe in the following section.

1 2 ... 17 18 19 20 21 22 23 24 25 26

Comentários a estes Manuais

Sem comentários

Analog-way Trans-Scaler XT - TSC550 Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Áudio Analog-way Trans-Scaler XT - TSC550