Analog-way Octo-Quattro - OTR401 Manual do Utilizador descarregar pdf (Página 19)

OCTO-QUATTRO™

PAGE 19

Chapter 6 : UPDATING THE DEVICE

The OCTO-QUATTRO

™

can be updated thanks a COMPUTER (PC) via its RS-232 communication port only.

6-1. CONNECTIONS

c Connect the "RS-232" connector of the OCTO-QUATTRO

™

to the SERIAL port of your COMPUTER with a DB9

M/F straight cable.

d Connect the OCTO-QUATTRO

™

to an AC power outlet.

e Switch OFF the OCTO-QUATTRO

™

(FRONT PANEL SWITCH = O).

6-2. UPDATE INSTRUCTIONS

c Open the file: Octo-Range-Update.exe (in Start > Program > ANALOGWAY > Octo-Range).

d In the Port menu select the COM port connected to the device.

e Click on "START" on the SOFTWARE.

f Press the ENTER button of the OCTO-QUATTRO

™

(FRONT PANEL), and SWITCH it ON simultaneously

(FRONT PANEL SWITCH = I ). The LCD screen displays Downloading, and the upgrade will start. Then you can

release the ENTER button.

g When the software displays "Program operation completed", SWITCH OFF and ON the OCTO-QUATTRO

™

with

the FRONT PANEL SWITCH.

h Click on the "Quit" button to close the update SOFTWARE.

NOTE:

YOUR OCTO-QUATTRO

™

IS NOW READY TO WORK.

NOTE:

If the "BAD TYPE DEVICE" message appears, selects the devices type in the Device menu, and renew the

previous operations (e to h).

NOTE:

The updater files are available on our web site: http://www.analogway.com

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 62 63

Sem comentários

Analog-way Octo-Quattro - OTR401 Manual do Utilizador Página 19