Analog way Axion2 Manual do Utilizador descarregar pdf (Página 3)

Setting up the Axion2

User conguration:

On startup, the Axion2 tactile screen will display the

User page. The rst time you use the Axion2, you

will have to create a new user.

1/ Press the New User button on the tactile screen

2/ Name the new user as required and press the

OK button to validate your choice. Press OK to skip

password creation.

3/ On the User page, choose the user you just

created, and press the OK button. The Axion2 will

display its default menu screen.

System conguration:

The Axion2 System Conguration page lets you

adjust the IP address of the Axion2.

1/ Press System on the tactile screen. The

Axion2 will display the IP conguration page of

the System menu.

2/ Select the Lan Settings option, rotate the

corresponding knobs to change the IP address

of the Axion2 (IP1, IP2, IP3, IP4) then press the

OK button to validate.

3/ Press OK again to Exit the system page.

Show conguration:

When starting with the Axion2, you will need to

create a new show.

1/ Press the Shows button on the tactile

screen then “Create a New Show” button.

2/ The Axion2 will display the Show Edit

Name screen, you can now enter a new name.

Choose a name for your show, then press the

OK button to validate your choice.

3/ The Axion2 will display a blank show page.

Conguring the show

Screen setup:

1/ Select a Screen in the Screen section of the Axion2

by pressing one of the six available buttons. The

Screen page will appear on the Axion2 tactile screen.

2/ Press Screen Setup on the tactile screen.

3/ On the Screen Setup, press Edit to rename your

screen, select the slave device type and mode.

4/ Press Edit Devices. Add Device / Communication

Type / LAN settings / OK. The tactile screen will display

a page which will let you choose the device you want

the Axion2 to control, select the communication

port type the device is connected to, and change

LAN settings

5/ Press the OK button to conrm if LAN settings

have been entered and match those of the slave

device. The Axion2 will connect to the device.

6/ Press the OK button to return to the Screen

Setup page.

Output conguration:

1/ In the Screen Setup page, press Edit

Outputs and select the output, Main or

Preview, you wish to display on, then select

the output format (resolution), output rate,

output type required.

2/ Press Pattern, and select an available

pattern to check your output settings on

screen. Press Pattern again, and select None

to revert to your image on screen.

3/ Press the OK button to return to the screen

setup page.

Input conguration:

1/ In the Screen Setup page, press Edit Inputs (you

can manually congure each input by selecting it or

press the Auto Setting All button, for an automatic

setup of your inputs.

2/ Press OK button.

Soft Edge setup:

Please refer to the Soft Edge Setup chapter

in the user manual to setup a Soft Edge

presentation.

Image settings:

In the screen setup page, to access source

image settings, press the IMAGE SETTINGS

button.

Logos & Frames conguration:

1/ In the screen setup page, press the LOGOS/

FRAMES button.

2/ Select a source you wish to use as a logo or

frame.

3/ Choose the memory slot to save the Logo/

Frame into (#1 to #8), edit size and position with the

joystick, and the Luma Key settings by rotating the

approriate knobs.

4/ Press STORE to store your logo or frame.

Rear Panel Description

1 2 3 4

Comentários a estes Manuais

Sem comentários

Analog way Axion2 Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Analog way Axion2